The Complete Guide to Sanding Your Deck

The Complete Guide to Sanding Your Deck

Decks can fade and look yellowed over time due to sun and rain. To eliminate unsightly fade marks, you must sand your deck with the correct grit sandpaper. You might be a DIY enthusiast and want to sand your deck successfully.

Inspecting the deck before you sand it is a good idea. Inspect the deck for protruding screws, nails, loose fastenings or rotten wood. After you have made any repairs, wash the deck and let it dry. After repairs are complete, you can use a sander on the deck to sand it and its edges. Finally, apply a finish.

Do you want to learn how to sand your deck? You are in the right place. For a detailed guide to DIY deck sanding, read on.

Get ready for the deck

Before you start a DIY floor sanding job, prepare the floor. The same applies to your deck. Begin by inspecting your entire deck, from the top to the edges.

Protruding screws or nails can cause damage to your sandpaper. If you find a few protruding nails, countersink them, so they are flush with your deck flooring.

Make sure to clean the deck

Once you have completed the repairs, it is time to clean your deck. You should choose cleaning products compatible with the wood on your deck. You will need a bucket, cleaning solutions, and a brush (with an extended pole).

To protect your deck’s structural integrity, it’s best to use oxygen bleach is better than chlorine bleach. This can cause wood strength to be compromised over time.

To remove dirt, mildew, and stains, scrub with the grain.

Select Your Favourite Sander

There are many sanders available, but it is best to use large sanders for deck sanding. Here are some sanders you can use for sanding your deck.

See also  VCP Provides Tiny Homes for Homeless Veterans

Belt Sander

A belt sander, also known as a strip-sander, is ideal for removing stubborn stains and finishes from wood.

A belt sander can smoothen rough surfaces once it has been fitted with sandpaper. Belt sanders can be used for large decks in the initial round of sanding.

Drum Sander

You can remove stubborn stains and paint remnants with a drum-sander.

Due to its overall power, the drum sander can cause serious damage to your deck. If used improperly, this bad boy could create irreparable grooves on your floor and cause damage.

If you do not want to start the sanding process using this device, it is best to be cautious.

Orbital Sander

Because of their simplicity, orbital sanders are often used for timber decking in Perth. An orbital sander can provide gentle sanding treatments, so you don’t have to risk damaging your deck.

Use orbital sanders to get the best results. Start with coarse grits and then move on to finer grit sandpapers.

Random Orbit Sander

This tool is great for projects that don’t require a specific grain pattern. A random orbit sander is more powerful than an orbital sander and can remove more paint and stains.

Advanced random orbit sanders have variable speed settings that allow for greater flexibility and efficiency while sanding. Random orbit sanders cannot get into corners because of their round sanding surfaces. This means you will need to use other sanders for those difficult-to-reach places.