Your body may come out of the shower clean but how clean is your bathroom shower itself? I clean mine on a daily basis, nothing intense just a quick spray with homemade shower spray and a super speedy wipe down when I’m in there. It seems to keep on top of the cleaning and as usual keeping on top of it means you have more time to do other things like…oh I don’t know? Reading a book or smuttery. So you can get away with the quick wipe down of a daily clean it’s great to start off first of all with a deep clean so you have a level playing field. You can also bust this deep clean out as and when your shower needs a good seeing too.
HOW TO DEEP CLEAN A REMOVABLE SHOWER
What you will need
Homemade shower spray – find the details here
A few scrubbing sponges
An old toothbrush
Homemade multi-purpose cleaner – find the details here
Bicarbonate of soda
White distilled vinegar
Before you get dawn started remove everything from the shower. Remove all products, razors, hair bands, flannels etc. and give them a good wipe and allow to dry whilst you get your deep clean on, baybeh.
The shower fitting, hose and head (we have an electric shower fitting but you may have taps, you can still do this part but obviously adapt it a little). Make sure your shower is turned off before starting.
– Grab your toothpick and go round every single join in the plastic casing and around the dials. You will be surprised at the amount of gunk in there.
– Do the same to the shower head.
-Fill a plastic sandwich bag (no a carrier bag won’t do – they have holes) 1/4 of the way with white vinegar and place the shower head inside. Wrap an elastic band around and leave for 5-10 minutes (very dirty and limescale coated shower heads may take longer) before rinsing. This should budge any dirt, grime and lime scale. Rinse the shower head and dry off with a dry cloth.
– Take your toothbrush and dip into neat white vinegar before running along the shower hose. If the hose has grooves or twists make sure you clean them thoroughly.
The tiles, screen or curtain
– If you have a curtain on door take it down and put on a 30 degree wash (higher if it isn’t plastic) with vinegar in the drum. Air out fully before returning to the rail. Don’t forget to give the rail a good wipe down with the shower spray before buffing dry.
– Make a thick paste of bicarbonate of soda and water then pack on to the grouting between tiles. Then buff off and down on to the tile with the toothbrush. Really get in there and give it a good even scrub. Spray with the shower spray and leave for 5 minutes before rinsing thoroughly.
– Spray your screen glass with the homemade cleaner and scrub with the scrubbing sponge before rinsing well. Then spray the screen with natural neat white vinegar and leave to work its magic whilst you run a cocktail stick very, very gently along any joins or edges of the shower screen or encasement. Rinse well with warm water.
Drain, flooring/bath and extras
– Remove any hair and product build up from around the plug hole, scrub the area with the bicarbonate of soda/water paste and toothbrush as above.
– Clean the base of your shower cubical, floor or bath tub with homemade multipurpose best cleaner and a scrubbing brush. Before sprinkling with bicarbonate of soda and cleaning in circular motions. Rinse very well.
– Pour 2 tablespoons of borax down the plug hole of bathtub and follow with a kettle of boiling hot water to keep the drains unblocked.
– Soak the plug in a solution of 50/50 white vinegar and water for half an hour before buffing dry.
The finishing act
– Spray the entire area with shower spray and rinse with the shower. Buff dry with a dry cloth.
Yep, it is fairly labour intensive but once done it gives you a lovely clean shower which takes limited daily cleaning with a spray bottle and cloth. You can also read about my daily cleaning routine.