By 
It’s spring, so it’s time for you to prepare your pool and get ready for an outdoor summer of water games and fun. Before you can return to the splash zone, you must ensure that all of your equipment is working correctly and your water is clear and balanced. If you’re looking for Pool Services in Ormond Beach, FL, you’ll want your pool service provider to discuss these seven tips with you to ensure your pool is ready for use.
1. Clean the Cover
2. Check the Pump
3. Cleaning the Filter
4. Scrub the Sides
5. Shock The Water
6. Balance the Chemicals
7. Schedule Weekly Service
Let’s now examine each of these stages in more detail.
Clean Your Cover
If you don’t live in a temperate climate you may have had to close your pool for the winter. Cleaning your cover properly will make it last longer.
* Remove all debris before removing the winter cover.
* To prevent dirt and grime from settling at the bottom, hose down the cover with water.
* Protect the cover from mold growth by letting them dry out before rolling or folding and storing.
Check The Pump And Top Off The Water
It is important to have a pump that works properly in order to get your pool ready for the summer, and keep it safe and clean throughout the season. Before proceeding, a professional will check that all seals are intact and the equipment is working correctly. They should be able also to recommend any repairs that are needed.
Replace Or Backwash The Filter
Your filters are an important part of the circulation system. Your pool professional may suggest that you backwash or replace the filter when opening your pool, and during the entire season. This will ensure the system continues to run as efficiently as possible.
Clean The Sides And Steps
No one wants to enter a pool with algae and grime all over its walls. Once you have verified that the filtration system works properly, it is time to scrub the tiles. Ask your maintenance person if an acid wash would be appropriate if the pool tile looks bad.
Shock The Water
You might think that it’s now time to dive in and see what the water is like. The water must first be shocked and then filtered. The process of pool shocking involves adding extra chlorine to the water in order to kill any excess bacteria and algae growth. Never go back into the water after it has been shocked. The excess chlorine must evaporate before you can get back in.
Balance The Water
You can’t just add chlorine to your water and hope for the very best. Maintain your water’s alkalinity between 80 and 120 ppm, and a pH level of 7.2 to 7.8 throughout the entire season. It can be difficult to get the right balance if you use test strips that are available over-the counter. However, a pool expert can have your water in perfect balance within minutes.
Schedule Weekly Services
It’s not enough to just “set it up and forget about it” you have to keep it clean and sparkling all summer.
* You will need to clean the filter regularly.
* It is possible that the water needs to be sprayed from time to time.
* Debris must be regularly removed.
* Water should be checked and balanced every week.
Comments