5 Simple Ways to Keep Your Roof Looking Like New

5 Simple Ways to Keep Your Roof Looking Like New

You have seen houses with moss growing on one side of their roofs.

What is the reason for moss on my roof?

Shade is a favorite place for moss to grow. It allows moisture to accumulate, and then the leaves absorb water through their leaves.

How did moss get on your roof?

Tiny seeds called spores can be carried by wind, rodents and birds to your roof.

These seeds can then become stuck between your shingles and other small sections, where they accumulate the moisture that they need to grow.

Once the moss has fully grown, the spongy texture of the moss absorbs water and can then spread over a roof that is shaded.

Moss can also be found growing on roofs.

Spraying moss off your roof is the best way to get rid of it. Then, use a bristle brush to clean the roof.

You should be careful not to damage the roofing granules of your asphalt shingles.

Moss removal can be purchased at most home improvement shops.

Mold growth on your roof

Let’s start by asking you what mold looks like on your roof.

Mold can appear like dirt or streaks on your roof. They can be black, brown or green in color, or even white.

Algae problems are common with mold.

Mold, just like moss, will often appear on roofs that aren’t dried off after past rainstorms.

Yes, moss can also grow on metal roofs so make sure to maintain them!

Mixing water and bleach together to spray on your roof to get rid of mold is the cheapest way to do it. After you are done, rinse it off with water.

Local home improvement shops can also sell stronger sprays for your roof and home.

Roof maintenance is time-consuming, but it will pay off in the long run.

1. Your roof is covered in debris

You can identify damage to your roof if you remove leaves and tree branches from your roof.

Behind a larger chimney is a common spot where debris can accumulate.

If you don’t have a chimney with a cricket, debris from the chimney will collect leaves and other small debris. It will also make a great place for water to sit.

It’s a good idea for larger branches to be removed from your roof and ensure that your metal roofing shingles or roofing shingles have not been damaged.

2 – Cut back trees and landscape

A great way to maintain a roof that looks new is to trim back trees and landscape.

Step 2 is an excellent way to remove moss, mold and other debris from your roof.

You’ll hopefully have more sunlight, which will allow your roof to dry out after a snowstorm or rainstorm.

There will be less debris on your roof, which means that branches won’t accumulate and water can pond.

You’ll reduce friction between the branches and the shingles if you remove any landscaping from your roof.

This is a great opportunity to maintain your shingle roof.

You will also be a blessing to your gutters by trimming trees and landscaping. This will reduce the likelihood of leaves clogging your gutters.

Who would have thought that gutter maintenance could be integrated into roof maintenance?

See also  The Importance of an Edmonton Home Inspection

3 – Keep your gutters clean –

It is important to maintain your roof’s appearance by keeping your gutters clean.

Rainwater runs off the shingles and drip edges when it rains. Your gutters take away the water from your home.

The chances of a leak decreasing when you clean your gutters.

Water can pond in full gutters, which allows water to climb back under the shingles onto your roof.

If gutters or downspouts don’t get cleaned up properly, water can clog and cause an overflow which could lead to damage to your home’s interior.

Water might also be able to get through the roof decking, causing the wood to rot.

It is a great way to maintain your roof’s appearance. Take care of your gutters.

4 – Ensure proper ventilation –

Proper ventilation on your roof can help prevent condensation.

As you shower, cook, heat your home, wash dishes, and perform other home chores, your home will produce incredible amounts of moisture.

The moisture rises and ends up in your ceilings or attic.

Condensation can occur when the roof’s underside is warmer and meets warm air.

Proper ventilation allows warm air to escape.

Condensation can cause mold growth on your roof decking, and even your roof’s roof rafters, if it isn’t properly ventilated.

Your roof may not have ventilation. This can cause extreme heat in your attic, which can lead to damage to your decking, underlayment and framing.

According to Professional of roofing in port angeles wa, shingles that are installed in attics above the roof can reduce your roof’s lifespan by as much as 10%.

Bellis said, “We see roofs that have been there for 10 years and they are now toast.” “Often, it’s the west and south slopes that experience accelerated aging. Because of their increased exposure to the sun, they are more likely to have inadequate attic ventilation surfaces. It is known as “The Tale of Two Roofs”.

“We did a project that involved an addition to a house. The roof decking looked like a rollercoaster. The decking was unsafe to walk on because it was rotten. The attic had no ventilation.”

Proper ventilation is another great way to keep your roof in tip-top shape.

5 – Give your roof a tune up!

These roof maintenance tips will help you keep your roof looking great.

You don’t have to be surprised by a leaky roof. Instead, take a look at your roof regularly and you will have a beautiful roof.

How often should your roof need to be maintained? We recommend a roof inspection every 3 to 5 years.

Roof maintenance allows your roof to be free from all debris.

As required, the caulking on exposed nails and counter flashing will be examined and repaired.

The nail pops will be pulled out and reset.

As needed, your pipe boots can be replaced or repaired.

If your roof has a fan it will be checked to ensure proper ventilation.

If you want your roof to last longer, it is worth having an additional set of eyes look at it from time to time.