Washing your windows is always a hectic job. A normal window cleaner will never be enough and you need something more than that to get wonderful results. Since the process is very time consuming, you’d want it to be right from the first minute itself. It’s very essential that you learn the tricks of the trade so that you can quickly and efficiently finish your job and move onto something more substantial.
Procedures By Which You Can Keep Your Windows Clean
Removing The Dust And Dirt
This is a basic trick you need to do before you start cleaning your windows. First, you need to clean all the accumulated dirt from the frame of the windows, with the help of a window cleaning brush.
You can also vacuum it as well, with the help of the device’s attachment used for dusting. This will aid you in preventing the window surface turning muddy when you directly try to clean it on the accumulated dirt.
Taking Out The Screens And Cleaning Them Separately
Using a brush will not always clean the window effectively and evenly as it can easily leave brush marks and thus you need to resort to other measures. The best way to clean your windows is to take the screens out from the frames separately and then start laying them down against a wall.
Spray the screens with a cleaning agent evenly on both sides and then use a clean cloth to rub them off. It’s suggested that you lay the screens against the wall so that they can get dry while you’re cleaning the other windows.
One of the reasons why using just a cleaner and some paper towels do not work while cleaning windows is because you need to wash the windows thoroughly with the required ingredients. It will remove the dust and will, therefore, perform the cleaning procedure flawlessly.
You have to use a mixture of vinegar, a gallon of water and a container containing liquid dish soap. Using too much soap can produce more lather, which can be hard to clean off later on. A teaspoon of liquid soap should be plenty. You have to apply the water on the windows with the help of a T-bar type mopping equipment, which is generally used for cleaning windows. This will make the cleaning process a lot swifter and easier.
Using Squeegee Directly On The Windows
A squeegee is a piece of sponge that is used to clean to clean windows, dining tables, kitchen sinks, etcetera. You have to get the same type of squeegee from your nearby departmental or even a retail home improvement shop.
The squeegee should be made slightly wet with water and then it can be used to wash the windows. Apply a little pressure on the squeegee and move it from top to bottom, only in a single direction. You can either do it vertically or even horizontally, as per your preferences. This method is known as the straight pull procedure. There is no limit and you can perform the task as many times you need to generously clean your windows in the best possible fashion.
Cleaning The Window Corners And Frames
Cleaning the windows is not only about the screens but also the corners and window frames as well. You have to clean off the excess water and dirt that will get accumulated after you’ve cleaned the screens successfully. You just need to grab a simple, dry towel and use it to wrap around your index finger. Then you need to clean the edges of the window frame and also remove any extra soap water or muddy water.
You have to continue repeating the process until you’re fully satisfied. The best idea would be to start on the outside and then begin to clean on the inside of the windows. After you’ve done the inside, finish off with a mop on the outside part again.
After that, you can reinstall your window screen safely into the window frames. Ensure whether the screen does through either the inside or the outside surface. You have to keep patience when installing the screens because if you’re in a haste, you might break the glass.