When it comes to mishaps and fire accidents, electrical fire has been proved crucial at all times! There have been numerous incidents wherein a house or a commercial centre has been turned into ashes with hundreds of casualties on the spot, making it more dangerous! That’s why there is a special emphasis on electrical safety everywhere you go, and specific attention is given to all the measures needed for safety in this area.
Even when we see so many drastic cases and accidents happening due to negligence of electrical connections and wirings, there are people taking this issue very lightly. It is essential to have accurate electrical connections within your home and offices — and this matter shouldn’t at all be ignored, since faults or failures in the electrical system bear a serious risk, which leads to electrocution and short circuits.
Major issues that may happen with your mistakes in the electrical connections!
Whether you’re a worker in some electrical industry, electrician, or repairing or installing an electrical wiring project on your own, there are various crucial yet common mistakes that are bound to happen but should be avoided. The results of any improper wiring and other problems in this connection cannot only cause inconvenience, but is also catastrophic! Read below the examples of several such drastic mistakes that you may be prone to, but shouldn’t at all be making!
- Wiring outside electrical boxes — Connection of wires through an electrical junction box from Electro Traders is essential for safeguarding the wires, as well as you. These boxes are specially designed to contain all these loose wires, are of excellent quality and highly durable. The basic use of electrical boxes is protection of wires and connections against any accidental damage, and also prevention of electrical fire problems by controlling the heat and sparks from loose connections, and even from short circuits.
- Using of very small electric boxes — If you’re not using the perfect sized electrical junction box, the wires in it would be stuffed into each other, and get jumbled. This means the box will be overfilled and crowded. When electric wiring is too tightly crammed in a very small space, there’s a high risk of overheating and short circuits. This can also be a visible sign of an upcoming fire hazard. That is why you should install a suitable and right sized junction box for your wires.
- Fixing of electrical boxes behind the walls — Incase an electrical box is fixed behind a flammable wall like wood, there’s this danger of a fire hazard. When coming in constant contact with the combustible wall material, the degree of stray sparks or high heat igniting this surface is higher. Instead, see to it that the box is fitted flush with the wall surface, which would automatically minimise the threat of fire hazards due to it.
- Wires being cut too short — If the wires are cut too short, proper connections coming from it would be even more difficult. And this is something very risky. Poor connections often lead to short circuits, overheating of wires and switches and other such major electrical faults. It’s better and safer to leave wires loose of about 3 inches from the box. This would make moving of this wire easy when making connections.
- Exposed plastic sheathed cable — When you are using cables that are covered with plastic, they require being protected against any damage from framing. You should attach small boards next to such delicate cables, especially if they are on or under the ceiling and wall frames. On the other hand, unprotected cables are very dangerous, and they shouldn’t be at all left open between framing.
- Unsupported switches and electrical outlets— Faulty or loosely connected or even unsupported switches and outlets do prove dangerous, along with being untidy to look at. These can be manhandled, thus damaging the connection of terminals and wires in it. This can again cause danger of overheating, which ultimately leads to short circuits and fires.
- Not securing cables or wires — When you are installing wires or cables, it’s important to secure them with a clamp in order to prevent any damage or strained connection. It’s better to use approved cable clamps if you have metal junction boxes, because wiring can get damaged with the sharp edge of such boxes.
Electronic wiring and socket safety remain the most vulnerable issue in any kind of place. Remember to follow the above guidelines and avoid those mistakes for a safer, better electricity usage!